CONEC SlimCon is the youngest member of the IP67 D-SUB connector family.The CONEC SlimCon series are very compact designs of IP67 tight D-SUB connectors with extremely small installation space requirements. The panel cut-out for the CONEC SlimCon series corresponds to that of other D-SUB connectors, so no new panel cut-outs are required and it is also possible to switch from standard IP20 systems to the IP67 CONEC SlimCon series.The one-piece zinc die-cast nickel plated shell provides â€“ similar to the CONEC Solid Body series â€“ outstanding mechanical robustness and protection.CONEC SlimCon connectors are designed for back panel mounting and are mechanically in contact with the panel on 4 surfaces provided for that purpose. Sealing to the shell is achieved by a blue gasket and due to the 4 contact surfaces, contact pressure at the sealing will always be the same. Thus, excess pressure at the sealing is avoided and safe assembly at the customerâ€™s is ensured. As far as we know, this feature is offered by no other manufacturer for the D-Sub range.The CONEC SlimCon series is offered for the three sizes of 9-, 15- and 25-pole models. Subsequent extension to sizes of 37- and 50-pole models is possible, if required for interesting projects.In addition to the back panel mounting variant, we also offer a variant with open threaded insert. This variant may be overmoulded at the customerâ€™s and thus provides an overmoulded cable version in IP67 tight design. An appropriate jack bolt is also offered.